LED Display Controller
- Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device
- Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled
- An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.
- The mosaic source is composed of several input connectors of the same type.
- Work with software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality
- Up to 4 units cascaded for image mosaic
- Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
Specifications
| Video & Audio Input | 3G-SDI x1, HDMI1.4 x 2, DVI x 2 |
| Video & Audio Output | HDMI1.3 x 1 |
| Network Interface | 10 |
| Control Interface | RJ45 × 1, USB x 2 |
| Max. Load Capacity | 6.5 MP |
| Frame Frequency | 60 Hz |
| Refresh Rate | 3840 Hz |
| Processing Depth | 8 bit |
| Grey Level | 16 bit |
| Display Color | 281 trillion |
| Brightness Control | 0 to 255 adjustable |
| Average Consumption | 28 W |
| Input Voltage | 100 to 240 VAC @50/60 Hz |
| Working Temperature | 0 to 45 °C |
| Working Humidity | 20% to 90% |
| Storage Temperature | -20 to 70 °C |
| Storage Humidity | 10% to 95% |
| Product Dimensions (W x H x D) | 483.6 x 351.2 x 50.1 mm |
| Certification | CE-EMC, CE-LVD, CB-LVD, RoHS |