LED Display Controller
- Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device
- Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled
- An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync
- The mosaic source is composed of two sources (2K×1K@60Hz) accessed to the OPT 1
- Work with software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency, allowing for better image quality
- Up to 4 units cascaded for image mosaic
Specifications
| Video & Audio Input | 3G-SDI x 1, HDMI 1.3 x 2, DVI x 1 |
| Video & Audio Output | HDMI1.3 x 1 |
| Network Interface | 6 |
| Control Interface | RJ45 × 1, USB x 2 |
| Max. Load Capacity | 3.9 MP |
| Frame Frequency | 60 Hz |
| Refresh Rate | 3840 Hz |
| Processing Depth | 8 bit |
| Grey Level | 16 bit |
| Display Color | 281 trillion |
| Brightness Control | 0 to 255 adjustable |
| Average Consumption | 28 W |
| Input Voltage | 100 to 240 VAC @50/60 Hz |
| Working Temperature | 0 to 45 °C |
| Working Humidity | 20% to 90% |
| Storage Temperature | -20 to 70 °C |
| Storage Humidity | 10% to 95% |
| Product Dimensions (W x H x D) | 483.6 x 351.2 x 50.1 mm |
| Certification | CE-EMC, CE-LVD, CB-LVD, RoHS |